You need to upgrade your Flash Player or to allow javascript to enable Website menu.
Get Flash Player

AS-i Master for
 

Allen-Bradley ControlLogix

 

2 AS-i Master

 

AS-i 3.0 from ID no. 12704

(see lateral Label)

 

 

 

 

Art. no. BW1611 complete set: AS-i 3.0 Master BWU1488 plus accessories BW1563
Art. no. BWU1488 AS-i 3.0 Master for Allen-Bradley ControlLogix
Art. no. BW1716 AS-i Master for Allen-Bradley ControlLogix
Class I Div. 2 (Group A, B, C & D, T-Code 4)

Function

The Bihl+Wiedemann AS-i Master for ControlLogix of Allen-Bradley has 2 AS-i masters according to the new specification. A fast and easy commissioning can be accomplished with the use of two push-buttons and the display.

AS-i I/O data and status information is mapped into the PLC processor's I/O data.

AS-i Scope

Diagnostics, which go far beyond the standard diagnostics facilitate the simple detection of the occassionally occuring configuration errors and further irritations towards the AS-i communication. So in case of an error the down time of machines can be minimized or you can initiate preventive maintenance.

Commissioning and monitoring

The AS-i Master can be commissioned respectively programmed with the help of the software "AS-i Control Tools". Commissioning, debugging and setting up the system without the software can only be accomplished with the use of two push-buttons, the display and the LEDs directly on the system.

 

Art. no.

BWU1488 / BW1716

Operating current

approx. 70 mA out of AS-i
approx. 390 mA out of power supply 5,1 V DC
approx. 150 mA out of power supply 24 V DC

Operating voltage

AS-i voltage 30 V DC

AS-i cycle time

150 μs*(Number of slaves + 2)

Displays

 

LED display

displaying slave addresses and error messages

LED green (PWR)

power on

LED green (OK)

communication and control information

LED red (Fault)

configuration error

LED green (U AS-i)

AS-i voltage OK

LED green ( AS-i act)

AS-i normal operation active

LED green (prg enable)

automatic address programming enabled

LED yellow (prj mode)

the master is in configuration mode

Push-buttons

2 (mode/set)

Voltage of insulation

≥ 500 V

EMC directions

EN 50 082, EN 50 081

Ambient operating temperature

0°C ... +55°C

Storage temperature

-25°C ... +85°C

Housing

housing for DIN-rail mounting

Dimensions (L, W, H)

146 mm, 35 mm, 132 mm

Protection category (DIN 40 050)

housing IP20

Weight

420 g

 

 

 

Accessories:

  • Software "AS-i Control Tools" with serial transmission cord for Allen-Bradley AS-i Master (Art. no. BW1563)

Информация взята с официального сайта компании Bihl+Wiedemann   http://www.bihl-wiedemann.de

 

О компании Продукция Производители Проекты Клиенты Контакты Карта сайта Форум