You need to upgrade your Flash Player or to allow javascript to enable Website menu.
Get Flash Player

PROFINET IO, offers IRT-technology, 1 integrated Switch
For BWU1912 from ID no. 12824
(see lateral label)
 
1 AS-i 3.0 Master
 
Recognition of duplicate AS-i addresses
 
AS-i Earth Fault Detector integrated
 
AS-i Noise Detector integrated

 

 

 

Article no.
BWU1912
Operating current
Master power supply
approx. 300 mA out of AS-i circuit
Operating voltage
AS-i voltage 30 V DC
PROFINET interface
RJ-45
Baud rates
10/100 MBaud
Serial interface
RS 232
Baud rate
19,2 KBaud
AS-i cycle time
150 μs*(number of slaves+ 2)
Displays
LCDs
displaying slave addresses and error messages
LED green (power)
power on
LED green PROFINET
PROFINET IO network active
LED red (config error)
configuration error
LED green (U AS-i)
AS-i voltage OK
LED green (AS-i active)
AS-i normal operation active
LED green (prg enable)
automatic address programming enabled
LED yellow (prj mode)
the master is in configuration mode
Buttons
4
Voltage of insulation
≥ 500 V
EMC directions
EN 50 295
EN 61 000-6-2
EN 61 000-6-4
Operating temperature
0°C ... +55°C
Storage temperature
-25°C ... +85°C
Housing
AS-i master housing in stainlees steel
Dimensions (L / W / H in mm)
120 / 85 / 83
Protection category (DIN 40 050)
IP20
Tolerable loading refering to impacts and vibrations
according to EN 61 131-2
Weight
500 g

 

Accessories:

  • Software "AS-i Control Tools" with serial cable for AS-i Master in Stainlees Steel (art. no. BW1602)
  • Cross-Link cable (art. no. BW1304)
  • AS-i Power Supply (art. no. BW1649)

 

 

 
PROFINET IO, offers IRT-technology, 1 integrated switch
2 AS-i 3.0 master
 
Recognition of duplicate AS-i addresses
 
AS-i Earth Fault Detector integrated
 
AS-i Noise Detector integrated
 
BWU2239: redundant power supply out of AS-i:
all fundamental functions of the device remain available
even in case of power failure in one of the two AS-i networks
 
BW2238 in version 1 gateway, 1 power supply for 2 AS-i circuits:
only 1 gateway + 1 AS-i power supply for 2 AS-i networks

 

 
Article no.
BWU2238
BWU2239
Operating current
Version "1 Power Supply, 1 Gateway for 2 AS-i Circuits", approx. 250 mA (PELV Supply)
master power supply,
max. 200 mA out of AS-i circuit 1
(approx. 70 mA ... 200 mA)
max. 200 mA out of AS-i circuit 2
(approx. 70 mA ... 200 mA);
in sum max. 270 mA
PROFINET interface
RJ-45
Baud rates
10/100 MBaud
Serial interface
RS 232
Baud rate
19,2 KBaud
AS-i cycle time
150 μs*(number of slaves+ 2)
Displays
LCDs
displaying slave addresses and error messages
LED green (power)
power on
LED green PROFINET
PROFINET IO network active
LED red (config error)
configuration error
LED green (U AS-i)
AS-i voltage OK
LED green (AS-i active)
AS-i normal operation active
LED green (prg enable)
automatic address programming enabled
LED yellow (prj mode)
the master is in configuration mode
Buttons
4
Voltage of insulation
≥ 500 V
EMC directions
EN 50 295
EN 61 000-6-2
EN 61 000-6-4
Operating temperature
0°C ... +55°C
Storage temperature
-25°C ... +85°C
Housing
AS-i master housing in stainlees steel
Dimensions (L / W / H in mm)
120 / 85 / 83
Protection category (DIN 40 050)
IP20
Tolerable loading refering to impacts and vibrations
according to EN 61 131-2
Weight
500 g

 

Accessories:

  • Software "AS-i Control Tools" with serial cable for AS-i Master in Stainlees Steel (art. no. BW1602)
  • Cross-Link cable (art. no. BW1304)
  • AS-i Power Supply (art. no. BW1649)

Информация взята с официального сайта компании Bihl+Wiedemann  http://www.bihl-wiedemann.de

 

О компании Продукция Производители Проекты Клиенты Контакты Карта сайта Форум